Program

8:30 am – 8:50 am

85 Investigation of the dynamic behavior of TPMS structures in IN718 nickel-based superalloy

36 DED Laser Wire deposition real-time monitoring and control

107 Progress in understanding sinter-based processes capabilities 

51 Life Cycle Assessment of PBF-LB process : Alloy-Specific Insights and Process Optimization

8:50 am – 9:10 am

45 Enabling Next-Generation Compact Heat Exchangers through L-PBF of Thin-Walled 316L Structures

86 In-Situ Process Monitoring and Machine Learning-Based Diagnostic for Wire Laser Additive Manufacturing of 316L Stainless Steel: A Small Torture Test Case Study

5 Production of Incol718 superalloy parts by MOLDJET technology

39 Sustainable Solutions for Titanium supply in Additive Manufacturing

9:10 am – 9:30 am

76 Influence of the laser strategies on the mechanical behaviour of additive manufactured Inconel TPMS

72 In-situ characterisation of melt pool temperature in a commercial PBF-LB system

79 Towards process robustness in Metal Binder Jetting (MBJ): understanding powder properties influence on printing step

34 Towards in-situ monitoring of environmental impact of WAAM: evaluation of the reliability of life cycle assessment data

9:30 am – 9:50 am

11 Characterization of Porous Metallic Structures Made by Additive Manufacturing for Heat Pipe Applications

57 Deep Learning Enhanced Spatter Trajectory Analysis for In-Situ Monitoring of Laser Powder Bed Fusion

99 Digital mass productions with HP Metal Jet : Materials & Manufacturing Strategies Accelerators

9 Data analysis and life cycle assessment approach to estimate the environmental performance of WAAM

10:35 am – 10:55 am

4 Very high deposition rate additive manufacturing of low alloy steel parts with high impact energy thanks to fine acicular ferrite

69 Optimizing Electromagnetic Performance of L-PBF Aluminium Waveguides through Surface Roughness Control

61 Corrosion fatigue behaviour of two LPBF 316L stainless steels

24 Influence of heat treatment on the impact toughness of a powder bed fusion laser beam manufactured 17-4 PH stainless steel

10:55 am – 11:15 am

95 Wire Arc Additive Manufacturing of parts with direct programming: some examples

59 Effect of LPBF process parameters on the production of NiTi thin struts

33 L-PBF manufacturing of Al10SiMg alloy using spatial beam shaping

68 Heat treatment of 316LSi made by Wire Arc Additive Manufacturing for Nuclear Components

11:15 am – 11:35 am

62 Study of aluminium alloy 7075 produced by additive friction stir deposition: implementation, microstructure, mechanical properties

27 Achieving High-Dimensional Accuracy in Net-Shape PBF Builds Using a Hybrid Simulation and Measurement-Based Approach

41 Aluminium Scandium alloys development for hydrogen applications

48 Small-angle scattering characterization of the microstructure of an additively manufactured 316L and its evolution during heat treatment

11:35 am – 11:55 am

111 Simulation-Driven Representation of the Additive Friction Stir Deposition Process: Development and Validation of a Multi-Layer Thermal

96 Future of the nuclear industry: development and industrialization of a 316L PBF-LB application

46 Microstructure and mechanical properties of a Co-free FeCrNiMn highentropy alloy produced by L-PBF

23 Heat Treatment Strategies for Optimizing the Mechanical Performance of a novel AlSi10Cu8Mg Alloy processed by PBF-LB

11:55 am – 12:15 pm

71 Fatigue resistance of 316L stainless steel cylindrical structures repaired using Cold Spray technology

112 In situ inspection for additive manufacturing

25 Effect of nano-oxide incorporation method on microstructure and mechanical properties of additive manufactured ODS Ni-based alloys

93 In situ Alloying of Ti-22Zr-11Nb-2Sn via Laser Powder Bed Fusion: Mechanical Properties and Heat Treatment Effects

1:50 pm – 2:20 pm

109 Multi-laser Directed Energy Deposition system with integrated formation control for microstructure optimization

2:20 pm – 2:50 pm

38 Metal AM as Production Technology – Concerns, Perspective and Parts

2:50 pm – 3:05 pm

21 AM-Standardization: Europe is shaping the future

3:50 pm – 4:10 pm

106 Advancing Additive Manufacturing: DNV’s Updated Standards for Qualification and Digital Supply Chains

4:10 pm – 4:30 pm

29 Quality Specification written by SNCF Voyageurs for different technologies of manufacturing

4:30 pm – 4:50 pm

52 Qualification activities for the PBF-LB/M process at Naval Group Angoulême-Ruelle: upcoming serial production of parts

4:50 pm – 5:10 pm

31 ARQANE project – Towards a global approach for Additive Manufacturing (L-PBF) machine/process qualification for the nuclear industry

5:10 pm – 5:50 pm

AM industrialization & qualification