Metal AMS

Download the PDF program just here.

Learn more about each speakers here.

Please note that this program is subject to change.

hours Room 6 Room 7 Room 8
8:30 am 9:00 am Opening Statement

Philippe Lubineau - Cetim Chief Research Officer French national Metal AM cohesion Jean-Jacques Blandin - Initiative 3D, Grenoble INP – Univ. Grenoble Alpes, CNRS Eric Charkaluk - GIS HEAD, CNRS, Ecole Polytechnique Nicolas Saintier - Addimalliance, GIS HEAD CNRS, Arts et Métiers Institute of Technology

9:00 am 9:30 am 3 - Microstructure control during wire and arc additive manufacturing

João Pedro Oliveira

9:30 am 10:00 am 75 - Ultrastrong nanotwinned titanium alloys through additive manufacturing

Aijun Huang Monash Centre for Additive Manufacturing, Monash University, Melbourne, Australia

10:00 am 10:30 am 7 - Process Modelling and Uncertainty Quantification in Laser-based Powder Bed Fusion of Metals

Massimo Carraturo University of Pavia, Pavia, Italy

10:30 am 11:15 am Coffee Break
11:15 am 11:35 am

S02-1 Process Monitoring & NDT

13 - Process monitoring and simplified FE modeling of LPBF melt-pools. Influence on the microstructures and mechanical properties of small Inconel 625 struts.

Patrice Peyre PIMM, UMR 806 CNRS-Cnam-Arts et Métiers, Paris, France

S03-1 Materials & Characterization

46 - Influence of defect shape and position on the High Cycle Fatigue behaviour of additively manufactured Ti-6Al-4V alloy

Matthieu Bonneric Arts et Métiers Institute of Technology, Talence, France

S04-1 Digital process chain & Simulation

38- Numerical simulation of WLAM process for Metal Forming Tool Repair

Yabo Jia UPHF-LAMIH, 59300, France

11:35 am 11:55 am

S02-1 Process Monitoring & NDT

9 - Powder Bed Absorptivity in LPBF Additive Manufacturing: Exploring the Interplay of Powder Characteristics, Recoating parameters and Substrate Effects

Robin Kromer I2M, UMR 5295, Univ. de Bordeaux, Arts et Métiers, CNRS, Talence, France

S03-1 Materials & Characterization

49 - Fatigue life assessment of WAAM ER70S-6 steel

Ivanna Pivdiablyk CETIM-Matcor Technology & Service Pte Ltd, Singapore, Singapore

S04-1 Digital process chain & Simulation


Vaibhav Nain IREPA LASER, Illkirch-Graffenstaden, France

11:55 am 12:15 pm

S02-1 Process Monitoring & NDT

31 - Sinogram-based data augmentation to automate the non-destructive control of mechanical parts

Nina Lassalle-Astis CETIM Sud-Ouest, Pau, France / LaBRI, Talence, France

S03-1 Materials & Characterization

62 - Numerical investigation of the influence of defects on the multiaxial fatigue strength of additively manufactured alloys

Sai Sreenivas Penkulinti I2M Bordeaux, ENSAM, Bordeaux, France


Ghassen Dali UTC, Compiegne, France

12:15 pm 12:35 pm

S02-1 Process Monitoring & NDT

65 - Review on in-situ thermal monitoring during direct energy deposition: methods, principles and applications

Marcia Meireles ArcelorMittal, Montataire, France

S03-1 Materials & Characterization

28 - Numerical study of first cyclic loadings on additively manufactured 316L stainless steel using a compartmentalized finite element model

Axel Monnier PhD student in SYMME Laboratory

S04-1 Digital process chain & Simulation

33 - Speeding up mesoscale conduction-based simulations of additive manufacturing processes: focus on temporal discretization and spatial adaptivity.

Simon Essongue Université de Bordeaux, Talence, France / Institut de mécanique et d'ingénierie - I2M, Talence, France

12:35 pm 2:00 pm Lunch
2:00 pm 2:30 pm 44 - Strategies for Qualification of Parts Printed by Metal Additive Manufacturing with Review of Fatigue Testing Requirements

John H. L. Pang Nanyang Technological University (NTU), Singapore, Singapore

2:30 pm 3:00 pm 74 - Effects of heat treatment on the microstructure and mechanical performance of an additively manufactured AlSi7Mg alloy

Gwenaelle Proust The University of Sydney, Sydney, Australia

3:00 pm 3:30 pm 1 - Revealing the complexity of 3D printed microstructures of steels

Francisca Garcia Caballero CENIM-CSIC, Madrid, Spain

3:30 pm 4:00 pm 70 - Designing fatigue-resistant Additively-Manufactured components: from understanding damage mechanisms in common metallic alloys to establishing a reliable fatigue assessment methodology

Luca Patriarca Politecnico di Milano, Milano, Italy

4:00 pm 4:40 pm Coffee Break
4:40 pm 5:00 pm

S05-1 Process / DED

68 - XXL Metal Additive Manufacturing : technological challenges and opportunities.

Didier Boisselier IREPA LASER, ILLKIRCH, France

S06-1 Process / AM Sinter-based

52- Mastering binder-powder interaction using Metal Binder Jetting process parameters for improved green parts quality

Thomas Cheny MINES Paris, Paris, France

S04-2 Digital process chain & Simulation

32 - Optimizing Velocity and Accuracy in Robotic 3D Printing: Impact of Point Density and Interpolation Methods

Sami Fadil ADAXIS, Bayonne, France

5:00 pm 5:20 pm

S05-1 Process / DED

57- Assessment of Wire Arc Additive Manufacturing (WAAM) Techniques through Metallurgical and Mechanical Characterisation in Mild Carbon Steel

Aishwarya Monash Centre for Additive Manufacturing, Monash University, Melbourne, Australia

S06-1 Process / AM Sinter-based

34 - Effect of the debinding/sintering strategy on the densification of aluminium alloys processed through Material Extrusion (MEX) Additive Manufacturing

Marion Coffigniez Université Grenoble Alpes, Saint-Martin d'Hères, France

S04-2 Digital process chain & Simulation

55 - Material Data Analytics in Nikon SLM Solutions

Deniz Sera Ertay Nikon SLM Solutions, Lübeck, Germany

5:20 pm 5:40 pm

S05-1 Process / DED

24 - Maturity, characterisation and decision support system: a multidisciplinary approach to select WAAM-CMT process parameters

Julie Lartigau Univ. Bordeaux, ESTIA-Institute of Technology, Bidart, France

S06-1 Process / AM Sinter-based

37 - Experimental study on the mechanical post-treatments applied on 17-4PH stainless steel additively manufactured parts.

Mahmoud Naim Université de technologie de Troyes (UTT), Troyes, France / Ecole polytechnique féminine (EPF), Troyes, France

S04-2 Digital process chain & Simulation

81 - Novel Multi-Scale Additive Manufacturing PBF Process Simulation Approach for Location-Specific Defect Predictions within Full-Scale Geometries

Simon Poly

5:40 pm 6:00 pm

S05-1 Process / DED

5 - Digital process chains for powder and wire-based 3D DED processes

Rainer Beccard LUNOVU GmbH, Aachen, Germany

S06-1 Process / AM Sinter-based

47 - Development of an economical sintering strategy for 316L stainless steel parts printed by Material Extrusion Addive Manufacturing (MEAM)

Sophie Badin CRITT - Matériaux Innovation, Charleville - Mézières, France

S04-2 Digital process chain & Simulation

14 - QuadWire: an extended 1D model for efficient mechanical simulations of bead-based additive manufacturing processes – optimization use case

Laurane Preumont LMS, CNRS, École Polytechnique, Institut Polytechnique de Paris, Palaiseau, France

6:00 pm 6:20 pm

S05-1 Process / DED

59 - Optimization of WLAM process Parameters for Metal Forming Tool Repair

Hans Boungomba Université Polytechnique des Hauts-de-France - LAMIH - UMR CNRS 8201 Campus Mont Houy, 59313 Valenciennes, France

S06-1 Process / AM Sinter-based

22 - Composite Ti-6Al-4V/Polymers Pellets Additive Manufacturing: improvement of the printing parameters to obtain dense and defectless part

Julien Bossu University of Mons, Mons, Belgium

S04-2 Digital process chain & Simulation

25 - A thermal-metallurgical-mechanical analysis and hot cracking characterization of grain structure generation via laser powder bed fusion

Zixuan Li Mine Paris, Sophia Antipolis, France

6:20 pm 6:40 pm

S05-1 Process / DED

63 - Residual Stress in Wire Arc Additive Manufacturing: Modeling – Instrumentation – Traceability

Elia Zgheib Société VLM Robotics, Lacanau de Mios, France / Laboratoire Génie de Production, INP-ENIT, Tarbes, France

S06-1 Process / AM Sinter-based

61 - Influence of the layer thickness and contours on mechanical properties of 17-4PH obtained by metal extrusion additive manufacturing

Joseph Marae Djouda EPF Ecole d'ingénieurs, Cachan, France / Laboratoire de Mécanique de Paris-Saclay, Gif-sur-Yvette, France

S04-2 Digital process chain & Simulation

60 - Numerical study of vapor generation on LPBF process - effect on process stability

Morgan Dal

6:40 pm End of Conferences