Metal AMS

Download the PDF program just here.

Learn more about each speakers here.

Please note that this program is subject to change.

hours Room 6 Room 7 Room 8
8:30 am 9:00 am 2 - Additive manufacturing of commercial Fe-based metallic glasses for soft magnetic applications

Maria Teresa Perez-Prado Imdea Materials Institute, Madrid, Spain

9:00 am 9:30 am 42 - Characterization of stainless steel produced by Binder Jetting and qualification process for applications in Oil & Gas industries

Tommaso Tirelli Aidro - Desktop Metal Company, Taino (Varese), Italy

9:30 am 10:00 am 72 - Additive manufacturing process optimization for innovative aluminium-carbon fibre reinforced polymer co-cured joints

Giorgio De Pasquale Politecnico di Torino, Torino, Italy

10:00 am 10:45 am Coffee Break
10:45 am 11:05 am

S07-1 Materials & Process

10 - Tensile properties of AlSi7Mg thin specimens manufactured by laser-powder bed fusion

Charles Bianchetti ONERA, Châtillon, France

S03-2 Materials & Characterization

16 - Printability of Titanium Alloy Ti64 by Additive Friction Stir Deposition: Study of process-microstructure-macroscopic properties

Ismail Zabeeullah Kolimi Université de technologie de Compiègne,CNRS, Roberval (Mechanics Energy and Electricity), Compiegne, France

S08-1 Post processing / Surface post-treatment

11 - A new hybrid electrochemical-mechanical process (PEMEC) for polishing additively manufactured parts.

Joël Reich

11:05 am 11:25 am

S07-1 Materials & Process

21 - Identifying Laser Beam Melting (LBM) process window for thin walls by enriching design of experiments with analytical physical models

Clément Ernould IRT Saint Exupéry, Toulouse, France

S03-2 Materials & Characterization

19 - Optimization of heat treatments for a LP – DED Maraging 18Ni300 steel to improve mechanical properties.

Hugo Huttenschmitt MBDA, Bourges, France

S08-1 Post processing / Surface post-treatment

4- super finishing MMP Technology : surface engineering to make your parts perform even better

Frédéric Bajard Binc Industries, Saint-Priest, France

11:25 am 11:45 am

S07-1 Materials & Process

26 - Understanding ageing mechanism of Al-based metallic powders: probing grain/grain interactions with Atomic Force Microscopy

Yassine Lakroune

S03-2 Materials & Characterization

50 - Predicting powder spreadability for metal AM.

Aurelien Neveu

S08-1 Post processing / Surface post-treatment

77- Strength/ductility trade-off of Laser Powder Bed Fusion Ti-6Al-4V: synergetic effect of alpha-case formation and microstructure evolution upon heat treatments

Quentin Gaillard

11:45 am 12:05 pm

S07-1 Materials & Process

29 - High performance aluminium components produced by laser powder bed fusion: fatigue performance of Aheadd© CP1

Jean-Christophe Ehrström Constellium C-TEC, Voreppe, France

S03-2 Materials & Characterization

54 - Latest advances in additive manufacturing characterization at European Synchrotron Radiation Facility (ESRF)

Andrea Francesco Ciuffini ESRF, Grenoble, France

S08-1 Post processing / Surface post-treatment

8 - Surface finishing technologies adapted for 3D printing mechanical components. Multi Process post processing treatment of high value additive manufacturing components

Martin Jay POLITECHNO, Bonson, France

12:05 pm 12:25 pm

S07-1 Materials & Process

36 - Comparative study of gaussian, top-hat and donut laser distribution for powder bed fusion additive manufacturing of AlSi10Mg alloy.

Pierre Hébrard PIMM Lab - Arts et Métiers, Paris, France

S03-2 Materials & Characterization

69 - Contribution of TEM to the study of metals processed by additive manufacturing

Arthur Despres Grenoble INP - Laboratoire SIMaP, Grenoble, France

S08-1 Post processing / Surface post-treatment

78 - Support-free DMLS® printing: myth or reality?

André Surel EOS France, Lyon, France

12:25 pm 1:50 pm Lunch
1:50 pm 2:20 pm 64 - Laser-powder bed fusion of high strength AlFeCrX aluminium alloys

Carmen Cepeda-Jimenez National Center for Metallurgical Research (CENIM, CSIC), Madrid, Spain

2:20 pm 2:50 pm 23 - Binder Jetting process Sustainablity: Powder Managemente

Iñigo Agote TECNALIA, San Sebastián, Spain


Andrea Friso Legor Group S.p.A., Vicenza, Italy

3:20 pm 4:05 pm Break
4:05 pm 4:25 pm

S09-1 Applications & sustainability / Process qualification

58 - Additive Manufacturing of nuclear Fuel Assembly metallic components - overview of Machine/Process qualification strategy

Guillaume Badinier Framatome, Lyon, France

S10-1 Advanced materials

15 - Microstructure and mechanical properties of as-built and heat-treated Laser Powder Bed Fusion Al0.3CoCrFeNi High Entropy Alloy

Thierry Baffie CEA-LITEN, Univ.Grenoble Alpes, Grenoble, France

S07-2 Materials & Process

6 - Study of oxide nanoprecipitate formation mechanisms in 316 L stainless steel produced by rapid solidification processes: gas atomization and Laser Powder Bed Fusion (L-PBF)/ effect on impact toughness.

Salima Benrabah

4:25 pm 4:45 pm

S09-1 Applications & sustainability / Process qualification

48 - Additive manufacturing of austenitic stainless steel non-planar and small thickness product by WAAM process

Théo Racine Naval Group, Indret, France

S10-1 Advanced materials

66 - New generation of high-performance metal powders designed for AM

Solange Vives Aubert&Duval, Paris, France

S07-2 Materials & Process

45 - Portevin-Le Chatelier effects in 316L stainless steels processed by LPBF for nuclear applications

Sylvain Dépinoy Mines Paris Université PSL, MAT - Centre des Matériaux, CNRS UMR 7633, Evry, France

4:45 pm 5:05 pm

S09-1 Applications & sustainability / Process qualification

17 - Wire and Arc Additive Manufacturing of Large Safety-CriticalComponents in the Nuclear Industry: Influence of Deposition Rate in the Submerged Arc Process

Antoine Kieffer EDF R&D, Les Renardières, 77250 Moret sur Loing, France Univ Lyon, INSA Lyon, UCBL, MATEIS, UMR5510, 69621 Villeurbanne, France

S10-1 Advanced materials

56 - Heat exchangers using TPMS architectures manufactured by LPBF

Vincent Bonnefoy CEA LITEN, Université Grenoble Alpes, Grenoble, France

S07-2 Materials & Process

51 - Study of strain heterogeneity within the microstructure of an additively manufactured 316L subjected to tensile and fatigue stresses using neutron diffraction and 3DXRD.

Lorène Héraud I2M, Arts et Métiers Institute of Technology, Talence, France

5:05 pm 5:25 pm

S09-1 Applications & sustainability / Process qualification

18 - Laser powder bed fusion process development for copper-aluminium alloys : towards spare parts for the railway infrastructures

Marie Fischer Pint, Metz, France

S10-1 Advanced materials

27 - Experimental and numerical evaluation of mechanical properties of hybrid lattice structures manufactured by selective laser melting

Zhaozhen Huang Univ. Savoie Mont Blanc, SYMME, Annecy, France

S07-2 Materials & Process

53 - Understanding the macroscopic properties of the PBF-LB 17-4 PH steel by a set of microstructural investigationsliveira Melo

Renata de Oliveira Melo CNRS, INRAE, Centrale Lille, UMR 8207—UMET—Unité Matériaux et Transformations, Université de Lille, Lille, France

5:25 pm 5:45 pm

S09-1 Applications & sustainability / Process qualification

82 - From R&D to Mass Production with the HP Metal Jet S100 Rocío Muñoz

Rocío Muñoz Moreno

S10-1 Advanced materials


Camille Buros Univ. Bordeaux, ESTIA-Institute of technology, BIDART, France

S07-2 Materials & Process

73 - Durability of additively manufactured austenitic stainless steels under fatigue-hydrogen coupling

Rahul Subramanian Girija Institut de Mécanique et d'Ingénierie (I2M) UMR 5295, Bordeaux, France

5:45 pm 6:00 pm Closing Ceremony